ZyXEL Communications IES1248 manual Prestige 660R-61 Settings

IES 1248 Support Notes

2. Prestige 660R-61 Settings

We configure Prestige 660R-61 as bridge mode. The default VPI/VCI of IES-1248 is 0/33. So we need to set up such values. Prestige 660R-61 has a Telnet server inside. We need to configure it via Telnet.

2.1 Menu1: General Setup

Go to Menu 1. In this menu, we must set “Rout IP = NO” and “Bridge = YES”.

2.2 Menu4: Internet Access Setup

The encapsulation must be RFC 1483 for bridge mode. The Multiplexing should be the same as IES-1248. The LLC-based is default mode of IES1248. Additionally, we must check if the VPI/VCI is the same as IES-1248. The default VPI/VCI of IES1248 is 0/33.

8

All contents copyright (c) 2006 ZyXEL Communications Corporation.