ZyXEL Communications IES1248 manual IES 1248 Support Notes

IES 1248 Support Notes

Please ftp into the DSLAM. Replace the rom-0 with the default rom file by put command.

c) IES1248

You can set the factory default by CLI command or WEB WEB:

Please open Maintenance Page. Click the “Restore Default Configuration” link.

It will pop up a dialog to ask for your confirmation. Please click “Ok” button.

Console/telnet:

You can enter the CLI command mode by console or telnet. Type “config restore” to restore the default settings. Then it will ask for your confirmation. Type “Y” to start

89

All contents copyright (c) 2006 ZyXEL Communications Corporation.