Chapter 4 Broadband
If your ISP assigns you a static WAN IP address, they should also assign you the subnet mask and DNS server IP address(es).
APN
Access Point Name (APN) is a unique string which indicates an LTE network. An APN is required for LTE stations to enter the LTE network and then the Internet.
4.1.3 Before You Begin
You may need to know your Internet access settings such as LTE APN, WAN IP address and SIM card’s PIN code if the INTERNET light on your LTE Device is off. Get this information from your service provider.
4.2 The Broadband Screen
The LTE Device must have a WAN interface to allow users to use the LTE connection to access the Internet. Use the Broadband screen to view or modify a WAN interface.
Click Network Setting > Broadband. The following screen opens.
Figure 13 Network Setting > Broadband
The following table describes the fields in this screen.
Table 4 Network Setting > Broadband
LABEL | DESCRIPTION |
Internet Setup |
|
|
|
Name | This is the service name of the connection. |
|
|
APN | This is the name of the LTE network to which the LTE Device will connect. |
|
|
IPv6/IPv4 Mode | This shows whether the connection uses IPv6 or IPv4. |
|
|
NAT | This shows whether NAT is activated or not for this connection. NAT is not available |
| when the connection uses the bridging service. |
|
|
Modify | Click the Edit icon to configure the connection. |
| Click the Delete icon to delete this connection from the Device. A window displays |
| asking you to confirm that you want to delete the connection. |
|
|
4.2.1 Edit Internet Connection
Use this screen to configure a WAN connection.
32 |
|
LTE6100 User’s Guide | |
|
|