Chapter 3 Connection Status and System Info
Table 3 System Info Screen (continued)
LABEL | DESCRIPTION |
Mode | This is the method of encapsulation used by your ISP. |
|
|
IP Address | This field displays the current IP address of the LTE Device in the WAN. |
|
|
LAN Information |
|
|
|
IP Address | This field displays the current IP address of the LTE Device in the LAN. |
|
|
IP Subnet Mask | This field displays the current subnet mask in the LAN. |
|
|
DHCP Server | This field displays what DHCP services the LTE Device is providing to the LAN. |
| Choices are: |
| Server - The LTE Device is a DHCP server in the LAN. It assigns IP addresses to |
| other computers in the LAN. |
| None - The LTE Device is not providing any DHCP services to the LAN. |
|
|
LTE Status |
|
|
|
Status | This displays 4G LTE if there is an LTE connection, otherwise, it displays N/A. |
|
|
Signal Strength | This displays the strength of the LTE connection that the LTE Device has with the |
| base station which is also known as eNodeB or eNB. |
|
|
Service Provider | This displays the service provider’s name of the connected LTE network. |
|
|
Frequency Band | This displays LTE if there is an LTE connection. |
|
|
Connection Uptime | This displays how long the LTE connection has been available since it was last |
| established successfully. |
|
|
ODU F/W Version | This displays the firmware version of the outdoor unit. |
|
|
Module F/W Version | This displays the firmware version of LTE module. |
|
|
IMEI | This displays the LTE Device’s International Mobile Equipment Identity number |
| (IMEI). An IMEI is a unique ID used to identify a mobile device. |
|
|
IMSI | This displays the International Mobile Subscriber Identity (IMSI) of the SIM card |
| inserted in the outdoor unit. An IMSI is a unique ID used to identify a mobile |
| subscriber in a mobile network. |
|
|
Interface Status |
|
|
|
Interface | This column displays each interface the LTE Device has. |
|
|
Status | This field indicates whether or not the LTE Device is using the interface. |
| For the LTE WAN interface, this field displays Up when the LTE Device is connected |
| to an LTE network and Down when the LTE Device does not have an LTE |
| connection. |
| For the LAN interface, this field displays Up when the LTE Device is using the |
| interface and Down when the LTE Device is not using the interface. |
|
|
Rate | For the LTE WAN interface, this displays 4G LTE if there is an LTE connection. |
| For the LAN interface, this displays the port speed and duplex setting. |
|
|
System Status |
|
|
|
System Up Time | This field displays how long the LTE Device has been running since it last started |
| up. The LTE Device starts up when you plug it in, when you restart it |
| (Maintenance > Reboot), or when you reset it (see Section 1.6 on page 15). |
|
|
Current Date/Time | This field displays the current date and time in the LTE Device. You can change this |
| in Maintenance > Time Setting. |
|
|
System Resource |
|
|
|
28 |
|
LTE6100 User’s Guide | |
|
|