Chapter 4 Broadband

The following table describes the fields in this screen.

Table 7 PUK Code

LABEL

DESCRIPTION

PUK code

Enter the PUK (Pin Unlock Key) code to unlock the SIM card.

 

 

New PIN code

Enter the new PIN code for the SIM card.

 

 

Apply

Click Apply to save your changes.

 

 

Cancel

Click Cancel to return to the previous screen without saving.

 

 

4.4 Technical Reference

The following section contains additional technical information about the LTE Device features described in this chapter.

Encapsulation

Be sure to use the encapsulation method required by your ISP. The LTE Device supports the following methods:

IP Address Assignment

A static IP is a fixed IP that your ISP gives you. A dynamic IP is not fixed; the ISP assigns you a different one each time. The Single User Account feature can be enabled or disabled if you have either a dynamic or static IP. However the encapsulation method assigned influences your choices for IP address and default gateway.

DNS Server Address Assignment

Use Domain Name System (DNS) to map a domain name to its corresponding IP address and vice versa. The DNS server is extremely important because without it, you must know the IP address of a computer before you can access it.

The LTE Device can get the DNS server addresses in the following ways.

1The ISP tells you the DNS server addresses, usually in the form of an information sheet, when you sign up. If your ISP gives you DNS server addresses, manually enter them in the DNS server fields.

2If your ISP dynamically assigns the DNS server IP addresses (along with the LTE Device’s WAN IP address), set the DNS server fields to get the DNS server address from the ISP.

 

35

LTE6100 User’s Guide