Chapter 5 Home Networking
Table 9 | Network Setting > Home Networking > LAN Setup (continued) | |
LABEL |
| DESCRIPTION |
DNS Server | Select From ISP if your ISP dynamically assigns DNS server information (and the LTE | |
|
| Device's WAN IP address). |
|
| Select |
|
| to use as the DNS server. |
|
| Select |
|
| address in the field to the right. If you chose |
|
| 0.0.0.0, |
|
| to |
|
| None after you click Apply. |
|
| Select None if you do not want to configure DNS servers. You must have another DHCP |
|
| sever on your LAN, or else the computers must have their DNS server addresses manually |
|
| configured. If you do not configure a DNS server, you must know the IP address of a |
|
| computer in order to access it. |
|
|
|
Apply |
| Click Apply to save your changes. |
|
|
|
Cancel |
| Click Cancel to restore your previously saved settings. |
|
|
|
5.3 The Static DHCP Screen
This table allows you to assign IP addresses on the LAN to specific individual computers based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
5.3.1 Before You Begin
Find out the MAC addresses of your network devices if you intend to add them to the Static DHCP screen.
Use this screen to change your LTE Device’s static DHCP settings. Click Network Setting > Home Networking > Static DHCP to open the following screen.
Figure 18 Network Setting > Home Networking > Static DHCP
The following table describes the labels in this screen.
Table 10 Network Setting > Home Networking > Static DHCP
LABEL DESCRIPTIONAdd new static Click this to add a new static DHCP entry. lease
#This is the index number of the entry.
42 |
|
LTE6100 User’s Guide | |
|
|