Chapter 6 Routing

6.2 Configuring Static Route

Use this screen to view and configure IP static routes on the LTE Device. Click Network Setting > Static Route to open the following screen.

Figure 22 Network Setting > Static Route

The following table describes the labels in this screen.

Table 13 Network Setting > Static Route

LABEL

DESCRIPTION

Add New Static

Click this to set up a new static route on the LTE Device.

Route

 

 

 

#

This is the number of an individual static route.

 

 

Active

This indicates whether the rule is active or not.

 

A yellow bulb signifies that this static route is active. A gray bulb signifies that this static

 

route is not active.

 

 

Status

This shows whether the static route is currently in use or not. A yellow bulb signifies that

 

this static route is in use. A gray bulb signifies that this static route is not in use.

 

 

Name

This is the name that describes or identifies this route.

 

 

Destination IP

This parameter specifies the IP network address of the final destination. Routing is always

 

based on network number.

 

 

Gateway

This is the IP address of the gateway. The gateway is a router or switch on the same

 

network segment as the device's LAN or WAN port. The gateway helps forward packets to

 

their destinations.

 

 

Subnet Mask

This parameter specifies the IP network subnet mask of the final destination.

 

 

Interface

This indicates which interface handles the traffic forwarded by this route.

 

 

Modify

Click the Edit icon to go to the screen where you can set up a static route on the LTE

 

Device.

 

Click the Delete icon to remove a static route from the LTE Device.

 

 

46

 

LTE6100 User’s Guide