Chapter 6 Routing

6.2.1 Add/Edit Static Route

Click add new Static Route in the Routing screen or click the Edit icon next to a rule. The following screen appears. Use this screen to configure the required information for a static route.

Figure 23 Routing: Add/Edit

The following table describes the labels in this screen.

Table 14 Routing: Add/Edit

LABEL

DESCRIPTION

Active

Click this to activate this static route.

 

 

Route Name

Enter the name of the IP static route. Leave this field blank to delete this static route.

 

 

Destination IP

This parameter specifies the IP network address of the final destination. Routing is always

Address

based on network number. If you need to specify a route to a single host, use a subnet

 

mask of 255.255.255.255 in the subnet mask field to force the network number to be

 

identical to the host ID.

 

 

IP Subnet Mask

Enter the IP subnet mask here.

 

 

Gateway IP

You can decide if you want to forward packets to a gateway IP address or a bound

Address

interface.

 

If you want to configure Gateway IP Address, enter the IP address of the next-hop

 

gateway. The gateway is a router or switch on the same network segment as the device's

 

LAN or WAN port. The gateway helps forward packets to their destinations.

 

 

Bound Interface

You can decide if you want to forward packets to a gateway IP address or a bound

 

interface.

 

If you want to configure Bound Interface, select the check box and choose an interface

 

through which the traffic is sent.

 

 

Apply

Click Apply to save your changes.

 

 

Back

Click Back to exit this screen without saving.

 

 

 

47

LTE6100 User’s Guide