Chapter 8 Network Address Translation (NAT)

8.3 The DMZ Screen

Use this page to set the IP address of your network DMZ (if you have one) for the LTE Device. All incoming packets received by this LTE Device’s WAN interface will be forwarded to the default server you set.

Click Network Setting > NAT > DMZ to display the following screen.

Note: The configuration you set in this screen takes priority than the Network Setting > NAT > Port Forwarding screen.

Figure 33 Network Setting > NAT > DMZ

The following table describes the fields in this screen.

Table 23 Network Setting > NAT > DMZ

LABEL

DESCRIPTION

Default Server

Enter the IP address of your network DMZ host, if you have one. 0.0.0.0 means this feature

Address

is disabled.

 

 

 

Apply

Click Apply to save your changes.

 

 

Cancel

Click Cancel to restore your previously saved settings.

 

 

8.4 The Sessions Screen

Use the Sessions screen to limit the number of concurrent NAT sessions each client can use.

Click Network Setting > NAT > Sessions to display the following screen.

Figure 34 Network Setting > NAT > Sessions

 

63

LTE6100 User’s Guide