ZyXEL Communications LTE6100 5.2 The LAN Setup Screen

Chapter 5 Home Networking

5.2 The LAN Setup Screen

Click Network Setting > Home Networking to open the LAN Setup screen. Use this screen to set the Local Area Network IP address and subnet mask of your LTE Device and configure the DNS server information that the LTE Device sends to the DHCP client devices on the LAN.

Figure 17 Network Setting > Home Networking > LAN Setup

The following table describes the fields in this screen.

Table 9 Network Setting > Home Networking > LAN Setup

LABEL	DESCRIPTION
LAN IP Setup
IP Address	Enter the LAN IP address you want to assign to your LTE Device in dotted decimal notation,
	for example, 192.168.1.1 (factory default).
IP Subnet Mask	Type the subnet mask of your network in dotted decimal notation, for example
	255.255.255.0 (factory default). Your LTE Device automatically computes the subnet mask
	based on the IP address you enter, so do not change this field unless you are instructed to
	do so.
DHCP Server State
DHCP	Select Enable to have your LTE Device assign IP addresses, an IP default gateway and DNS
	servers to LAN computers and other devices that are DHCP clients.
	If you select Disable, you need to manually configure the IP addresses of the computers
	and other devices on your LAN.
	When DHCP is used, the following fields need to be set.
IP Addressing Values
IP Pool Starting	This field specifies the first of the contiguous addresses in the IP address pool.
Address
Pool Size	This field specifies the size, or count of the IP address pool.
DNS Values

	41
LTE6100 User’s Guide