Chapter 7 Quality of Service (QoS)
7.3 The Queue Setup Screen
Use this screen to configure QoS queue assignment. Click Network Setting > QoS > Queue Setup to open the screen as shown next.
Figure 25 Network Setting > QoS > Queue Setup
The following table describes the labels in this screen.
Table 16 Network Setting > QoS > Queue Setup
LABEL | DESCRIPTION |
Add new | Click this to create a new entry. |
Queue |
|
|
|
# | This is the index number of this entry. |
|
|
Status | This indicates whether the queue is active or not. |
| A yellow bulb signifies that this queue is active. A gray bulb signifies that this queue is not |
| active. |
|
|
Name | This shows the descriptive name of this queue. |
|
|
Interface | This shows the name of the LTE Device’s interface through which traffic in this queue passes. |
|
|
Priority | This shows the priority of this queue. |
|
|
Weight | This shows the weight of this queue. |
|
|
Buffer | This shows the queue management algorithm used by the LTE Device. |
Management |
|
|
|
Rate Limit | This shows the maximum transmission rate allowed for traffic on this queue. |
(kbps) |
|
|
|
Modify | Click the Edit icon to edit the queue. |
| Click the Delete icon to delete an existing queue. Note that subsequent rules move up by |
| one when you take this action. |
|
|
| 51 |
LTE6100 User’s Guide | |
|
|