Chapter 8 Network Address Translation (NAT)

8.2.2 The Port Forwarding Edit Screen

This screen lets you create or edit a port forwarding rule. Click Add new rule in the Port Forwarding screen or the Edit icon next to an existing rule to open the following screen.

Figure 32 Port Forwarding: Add/Edit

The following table describes the labels in this screen.

Table 22 Port Forwarding: Add/Edit

LABEL

DESCRIPTION

Service Name

Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).

 

 

WAN Interface

This is the WAN interface through which the service is forwarded.

 

 

Start Port

Enter the original destination port for the packets.

 

To forward only one port, enter the port number again in the External End Port field.

 

To forward a series of ports, enter the start port number here and the end port number in

 

the External End Port field.

 

 

End Port

Enter the last port of the original destination port range.

 

To forward only one port, enter the port number in the External Start Port field above

 

and then enter it again in this field.

 

To forward a series of ports, enter the last port number in a series that begins with the

 

port number in the External Start Port field above.

 

 

Translation Start

This shows the port number to which you want the LTE Device to translate the incoming

Port

port. For a range of ports, enter the first number of the range to which you want the

 

incoming ports translated.

 

 

Translation End

This shows the last port of the translated port range.

Port

 

 

 

Server IP

Enter the inside IP address of the virtual server here.

Address

 

 

 

Protocol

Select the protocol supported by this virtual server. Choices are TCP, UDP, or TCP/UDP.

 

 

Apply

Click Apply to save your changes.

 

 

Back

Click Back to return to the previous screen without saving.

 

 

62

 

LTE6100 User’s Guide