Chapter 5 Tutorials

5.2.1.1 Push Button Configuration (PBC)

1Make sure that your NBG-418N is turned on and that it is within range of your computer.

2Make sure that you have installed the wireless client (this example uses the NWD210N) driver and utility in your notebook.

3In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button)

4Log into NBG-418N’s Web Configurator and press Push Button in the Network > Wireless LAN > WPS Station screen.

Note: Your NBG-418N has a WPS button located on its panel, as well as a WPS button in its configuration utility. Both buttons have exactly the same function; you can use one or the other.

Note: It doesn’t matter which button is pressed first. You must press the second button within two minutes of pressing the first one.

The NBG-418N sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the NBG-418N securely.

The following figure shows you an example to set up wireless network and security by pressing a button on both NBG-418N and wireless client (the NWD210N in this example).

58

 

NBG-418N User’s Guide