Chapter 17 Tools

The following table describes the labels in this screen.

Table 56 Maintenance > Tools > Firmware

LABEL

DESCRIPTION

File Path

Type in the location of the file you want to upload in this field or click Browse... to find it.

 

 

Browse...

Click Browse... to find the .bin file you want to upload. Remember that you must

 

decompress compressed (.zip) files before you can upload them.

 

 

Upload

Click Upload to begin the upload process. This process may take up to two minutes.

 

 

Note: Do not turn off the NBG-418N while firmware upload is in progress!

After you see the Firmware Upload In Process screen, wait for several minutes before logging into the NBG-418N again.

Figure 95 Upload Warning

The NBG-418N automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 96 Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the Status screen.

If the upload was not successful, the following screen will appear. Click Return to go back to the Firmware screen.

Figure 97 Upload Error Message

132

 

NBG-418N User’s Guide