ZyXEL Communications nbg-418n TAB, LINK, Table, Figure, FUNCTION

Chapter 4 Modes

Figure 29 Menus: Router Mode

The following table describes the sub-menus.

Table 18 Menus: Router Mode

LINK	TAB	FUNCTION
Status		This screen shows the NBG-418N’s general device, system and interface
		status information. Use this screen to access the wizard, and summary
		statistics tables.
Network
Wireless	General	Use this screen to configure wireless LAN.
LAN
	MAC Filter	Use the MAC filter screen to configure the NBG-418N to block access to
		devices or block the devices from accessing the NBG-418N.
	Advanced	This screen allows you to configure advanced wireless settings.
	QoS	Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
		QoS). WMM QoS allows you to prioritize wireless traffic according to the
		delivery requirements of individual services.
	WPS	Use this screen to configure WPS.
	WPS Station	Use this screen to add a wireless station using WPS.
	Scheduling	Use this screen to schedule the times the Wireless LAN is enabled.
WAN	Internet	This screen allows you to configure ISP parameters, WAN IP address
	Connection	assignment, DNS servers and the WAN MAC address.
LAN	IP	Use this screen to configure LAN IP address and subnet mask.
DHCP	General	Use this screen to enable the NBG-418N’s DHCP server.
Server
	Advanced	Use this screen to assign IP addresses to specific individual computers
		based on their MAC addresses and to have DNS servers assigned by the
		DHCP server.
	Client List	Use this screen to view current DHCP client information and to always
		assign an IP address to a MAC address (and host name).

	43
NBG-418N User’s Guide