18
Sys OP Mode
18.1 Overview
The Sys OP Mode (System Operation Mode) function lets you configure select the device operation mode: Router, Access Point, Client Bridge or Universal Repeater.
See Chapter 4 on page 35 for more information on which mode to choose.
18.2 General Screen
Use this screen to select how you connect to the Internet.
Figure 103 Maintenance > Sys OP Mode > General
The following table describes the labels in the General screen.
Table 58 Maintenance > Sys Op Mode > General
LABELDESCRIPTIONSystem Operation Mode
Router | Use this mode if you want to use routing functions such as LAN DHCP, NAT, firewall and |
| so on on the |
| addresses. |
|
|
Access Point | Use this mode if you already have a Router (R) in your network and you want to bridge |
| all wired and wireless network connections. |
|
|
| 137 |
|
|