Chapter 4 Modes

Note: Wait while the NBG-418N restarts, then log in to the Web Configurator again.

4.5.1 Status Screen (Client Bridge Mode)

Click on Status. The screen below shows the status screen in Client Bridge Mode. Figure 37 Status Screen (Client Bridge Mode)

The following table describes the labels shown in the Status screen.

Table 23 Status Screen (Client Bridge Mode)

LABEL

DESCRIPTION

Device Information

 

 

 

System Name

This is the System Name you enter in the Maintenance > System >

 

General screen. It is for identification purposes.

 

 

Firmware Version

This is the current firmware version of the NBG-418N.

 

 

WLAN Information

 

 

 

- SSID

This is the name of the selected AP that the NBG-418N is associating with.

 

 

- Operating Channel

This shows the channel that is used to connect to the selected AP.

 

 

- Security Mode

This shows the wireless security the NBG-418N is using to connect to the AP.

 

 

- Connection Status

This shows whether the NBG-418N is currently associated with the selected AP.

 

 

LAN Information

 

 

 

- MAC Address

This shows the LAN Ethernet adapter MAC Address of your device.

 

 

- IP Address

This shows the LAN port’s IP address.

 

 

- IP Subnet Mask

This shows the LAN port’s subnet mask.

 

 

- DHCP

This shows the LAN port’s DHCP role - None.

 

 

System Status

 

 

 

Operation Mode

This field shows the device operation mode: Router, Access Point, Client

 

Bridge or Universal Repeater.

 

 

System Up Time

This is the total time the NBG-418N has been on.

 

 

 

53

NBG-418N User’s Guide