Chapter 4 Modes

Note: Wait while the NBG-418N restarts, then log in to the Web Configurator again.

4.4.1 Status Screen (Universal Repeater Mode)

Click on Status. The screen below shows the status screen in Universal Repeater Mode. Figure 34 Status Screen (Universal Repeater Mode)

The following table describes the labels shown in the Status screen.

Table 21 Status Screen (Universal Repeater Mode)

LABEL

DESCRIPTION

Device Information

 

 

 

System Name

This is the System Name you enter in the Maintenance > System >

 

General screen. It is for identification purposes.

 

 

Firmware Version

This is the current firmware version of the NBG-418N.

 

 

LAN Information

 

 

 

- MAC Address

This shows the LAN Ethernet adapter MAC Address of your device.

 

 

- IP Address

This shows the LAN port’s IP address.

 

 

- IP Subnet Mask

This shows the LAN port’s subnet mask.

 

 

- DHCP

This shows the LAN port’s DHCP role.

 

 

 

49

NBG-418N User’s Guide