Chapter 3 Connection Wizard
Figure 10 Wizard Step 2: Wireless LAN
The following table describes the labels in this screen.
Table 4 Wizard Step 2: Wireless LAN
LABEL | DESCRIPTION |
Name (SSID) | Enter a descriptive name (up to 32 printable |
| If you change this field on the |
| SSID in order to access the network. |
|
|
Security | Select a Security level from the |
| Choose None to have no wireless LAN security configured. If you do not enable any wireless |
| security on your |
| that is within range. If you choose this option, skip directly to Section 3.4 on page 25. |
| Choose |
| option only if your wireless clients support |
| choose this option, skip directly to Section 3.3.1 on page 24. |
|
|
Channel | The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a |
Selection | channel. |
| Set the operating frequency/channel depending on your particular region. Select a channel |
| from the |
| country you are in. |
| This option is only available if Auto Channel Selection is disabled. |
|
|
Auto Channel | Select this option for the |
Selection | interference. Deselect this option if you wish to manually select the channel using the |
| Channel Selection field. |
|
|
Back | Click Back to display the previous screen. |
|
|
Next | Click Next to proceed to the next screen. |
|
|
Exit | Click Exit to close the wizard screen without saving. |
|
|
Note: The wireless stations and
3.3.1
Choose
24 |
|
|
|