Chapter 13 Remote Management
13.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1You have disabled that service in one of the remote management screens.
2The IP address in the Secured Client WAN IP Address field does not match the client IP address. If it does not match, the
3There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time.
4There is a firewall rule that blocks it.
13.1.2Remote Management and NAT
When NAT is enabled:
•Use the
•Use the
13.1.3System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The
13.2 WWW Screen
To change your
Figure 81 Management > Remote MGMT > WWW
116 |
|
|
|