ZyXEL Communications nbg-418n manual 55

Chapter 4 Modes

The following table describes the sub-menus.

Table 24 Menu: Client Bridge Mode

LINK	TAB	FUNCTION
Status		This screen shows the NBG-418N’s general device, system and interface
		status information. Use this screen to access the wizard, and summary
		statistics tables.
Network
WLAN	AP Select	Use this screen to choose an access point that you want the NBG-418N to
		connect to. You should know the security settings of the target AP.
	WLAN	Use this screen to view the SSID and security of the selected AP wireless
	Information	network.
	Advanced	Use this screen to configure advanced wireless settings.
LAN	IP	Use this screen to configure LAN IP address and subnet mask.
Maintenance
System	General	Use this screen to view and change administrative settings such as
		system and domain names, password and inactivity timer.
	Time Setting	Use this screen to change your NBG-418N’s time and date.
Logs	View Log	Use this screen to view the logs for the categories that you selected.
Tools	Firmware	Use this screen to upload firmware to your NBG-418N.
	Configuration	Use this screen to backup and restore the configuration or reset the
		factory defaults to your NBG-418N.
	Restart	This screen allows you to reboot the NBG-418N without turning the power
		off.
Sys OP Mode	General	This screen allows you to select whether your device acts as a Router,
		Access Point, Client Bridge or Universal Repeater.
Language	Language	This screen allows you to select the language you prefer.

	55
NBG-418N User’s Guide