Chapter 13 Remote Management

The following table describes the labels in this screen.

Table 49 Management > Remote MGMT > WWW

LABEL

DESCRIPTION

Enable WWW

Click the Enable WWW check box to configure your NBG-418N v2 via HTTP using

 

a web browser.

 

 

Server Port

You may change the Server port number for a service if needed, however you

 

must use the same port number in order to use that service for remote

 

management.

 

 

Secured Client WAN IP

A secured client is a “trusted” computer that is allowed to communicate with the

Address

NBG-418N v2 using this service.

 

Select All to allow any computer to access the NBG-418N v2 using this service.

 

Choose Selected to just allow the computer with the IP address that you specify to

 

access the NBG-418N v2 using this service.

 

Note: This only applies on WAN IP.

 

 

Apply

Click Apply to save your customized settings and exit this screen.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

NBG-418N v2 User’s Guide

117