Chapter 2 The Web Configurator

Figure 5 Selecting the setup mode

2.3 Resetting the NBG-418N v2

If you forget your password or IP address, or you cannot access the Web Configurator, you will need to use the WPS/RESET button at the back of the NBG-418N v2 to reload the factory-default configuration file. This means that you will lose all configurations that you had previously saved, the username will be reset to admin and password will be reset to 1234. The IP address will be reset to “192.168.1.1”.

Make sure the power LED is on and press the WPS/RESET button for longer than 10 seconds to restart/reboot and set the NBG-418N v2 back to its factory-default configurations.

NBG-418N v2 User’s Guide

19