Chapter 3 Connection Wizard

By implementing PPPoE directly on the NBG-418N v2 (rather than individual computers), the computers on the LAN do not need PPPoE software installed, since the NBG-418N v2 does that part of the task. Furthermore, with NAT, all of the LAN's computers will have Internet access.

Figure 9 Wizard Step 2: PPPoE Connection

The following table describes the labels in this screen.

Table 4 Wizard Step 2: PPPoE Connection

LABEL

DESCRIPTION

PPPoE

 

 

 

User Name

Type the user name given to you by your ISP.

 

 

Password

Type the password associated with the user name above.

 

 

Confirm Password

Type the password again for confirmation.

 

 

Account Validate

Click the Account Validate button to establish the Internet connection via PPPoE

 

encapsulation.

 

 

Back

Click Back to return to the previous screen.

 

 

Next

Click Next to continue.

 

 

Exit

Click Exit to close the wizard screen without saving.

 

 

3.2.2 Dynamic IP Connection

Use the dynamic IP connection when your network administrator or ISP assigns your IP address dynamically.

NBG-418N v2 User’s Guide

23