Chapter 15 Bandwidth MGMT
The following table describes the labels in this screen.
Table 51 Management > Bandwidth MGMT > Bandwidth MGMT
LABEL |
| DESCRIPTION |
Service Management |
| |
|
|
|
Enable Bandwidth |
| Click the Enable Bandwidth Management check box to activate the bandwidth |
Management |
| management feature in the |
|
|
|
Apply |
| Click Apply to save your changes in t his screen. |
|
|
|
Reset |
| Click Reset to begin configuring this screen afresh. |
|
|
|
15.5 Advanced Screen
Use this screen to setup the QoS rules for the
Figure 93 Management > Bandwidth MGMT > Advanced
The following table describes the labels in this screen.
Table 52 Management > Bandwidth MGMT > Advanced
LABEL | DESCRIPTION |
QoS Setup |
|
|
|
Total Bandwidth (0, | This field shows the maximum number of data in kbps the |
Unlimited) | send out and allowed to come in through a source interface. |
|
|
Up Stream | Type the Up Stream or maximum outgoing transmission data rate (kbps) that is |
| allowed to go through the source interface on the |
|
|
Down Stream | Type the Down Stream or maximum incoming transmission data rate (kbps) that is |
| allowed to go through the source interface on the |
|
|
Apply | Click Apply to save your changes back to the |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
QoS Rules |
|
|
|
# | This field shows the index number of the QoS rule. |
|
|
Source IP Address | This field shows the source IP Address of the data traffic. |
|
|
Max Bandwidth(kpbs) | |
|
|
Up Ceiling | This field shows the maximum outgoing transmission data rate (kbps) that is allo wed to |
| go through the source interface on the |
|
|
Down Ceiling | This field shows the maximum outgoing transmission data rate (kbps) that is allowed to |
| go through the source interface on the |
|
|
Delete | Click the Delete check box to select the QoS rule you want to delete. |
|
|
127