Chapter 18 Tools

The following table describes the labels in this screen.

Table 56 Maintenance > Tools > Firmware

LABEL

DESCRIPTION

Choose File

Click Choose File button to find the.bin file you want to upload. Remember that you must

 

decompress compressed (.zip) files before you can upload them.

 

 

Automatically

Click the Automatically reset default after firmware upgraded check box to have the

reset default

NBG-418N v2 automatically reset itself after the new firmware is uploaded.

after firmware

 

upgraded

 

 

 

Upload

Click Upload to begin the upload process. This process may take up to two minutes.

 

 

Check for

Click Check for Latest Firmware Now button to have the NBG-418N v2 search for the

Latest

latest firmware available online at ZyXEL’s website.

Firmware Now

 

 

 

Note: Do not turn off the NBG-418N v2 while firmware upload is in progress!

After you see the Firmware Upload In Process screen, wait for several minutes before logging into the NBG-418N v2 again.

Figure 98 Upload Warning

The NBG-418N v2 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 99 Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the Status screen.

If the upload was not successful, the following screen will appear. Click Return to go back to the Firmware screen.

NBG-418N v2 User’s Guide

135