Chapter 18 Tools

18.4.2 Restore Configuration

Restore configuration allows you to upload a new or previously saved configuration file from your computer to your NBG-418N v2.

Table 57 Maintenance Restore Configuration

LABEL

DESCRIPTION

Choose File

Click Choose File button to find the backup file of previous configuration you saved on your

 

computer using the Backup button.

 

 

Upload

Click Upload to begin the upload process.

 

 

Note: Do not turn off the NBG-418N v2 while configuration file upload is in progress.

After you see a “configuration upload successful” screen, you must then wait one minute before logging into the NBG-418N v2 again.

Figure 102 Configuration Restore Successful

The NBG-418N v2 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 103 Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default NBG-418N v2 IP address (192.168.1.1 in router mode). See Appendix C on page 167 for details on how to set up your computer’s IP address.

If the upload was not successful, the following screen will appear. Click Return to go back to the Configuration screen.

Figure 104 Configuration Restore Error

NBG-418N v2 User’s Guide

137