5

Tutorials

5.1 Overview

This chapter provides tutorials for your NBG-418N v2 as follows:

•How to Connect to the Internet from an AP

•Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client

•Enable and Configure Wireless Security without WPS on your NBG-418N v2

•Using Multiple SSIDs on the NBG-418N v2

•Using Bandwidth Management on the NBG-418N v2

5.2How to Connect to the Internet from an AP

This section gives you an example of how to set up an access point (AP) and wireless client (a notebook, B in this example) for wireless communication. B can access the Internet through the AP wirelessly.

Figure 30 Wireless AP Connection to the Internet

BAP

5.3Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client

This section gives you an example of how to set up wireless network using WPS. This example uses the NBG-418N v2 as the AP and NWD210N as the wireless client which connects to a notebook.

Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or PCI card).

There are two WPS methods for creating a secure connection. This tutorial shows you how to do both.

NBG-418N v2 User’s Guide

44