ZyXEL Communications NBG-418N v2 LED, Table, COLOR, Figure, STATUS, DESCRIPTION

Chapter 1 Introduction

1.3 LEDs

Figure 2 Front Panel

The following table describes the LEDs and the WPS button.

Table 1 Front Panel LEDs and WPS Button

LED	COLOR	STATUS	DESCRIPTION
POWER	Green	On	The NBG-418N v2 is receiving power and functioning properly.
		Off	The NBG-418N v2 is not receiving power.
WAN	Green	On	The NBG-418N v2 has a successful 10/100MB WAN connection.
		Blinking	The NBG-418N v2 is sending/receiving data through the WAN.
		Off	The WAN connection is not ready, or has failed.
WLAN	Green	On	The NBG-418N v2 is ready, but is not sending/receiving data
			through the wireless LAN.
		Blinking	The NBG-418N v2 is sending/receiving data through the
			wireless LAN.
			The NBG-418N v2 is negotiating a WPS connection with a
			wireless client.
		Off	The wireless LAN is not ready or has failed.
WPS	Green	On	WPS status is configured.
		Blinking	The NBG-418N v2 is negotiating a WPS connection with a
			wireless client.
		Off	The WPS status is not configured or disabled.

1.4 The WPS/RESET Button

Your NBG-418N v2 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless network. WPS is an industry standard specification, defined by the WiFi Alliance.

NBG-418N v2 User’s Guide

14