Chapter 5 Tutorials

For example, you may set up three wireless networks (A, B and C) in your office. A is for workers, B is for guests and C is specific to a VoIP device in the meeting room.

A

SSID_Workers

C

SSID_VoIP

B

SSID_Guest

5.5.1 Configuring Security Settings of Multiple SSIDs

The NBG-418N v2 is in router mode by default.

This example shows you how to configure the SSIDs with the following parameters on your NBG- 418N v2 (in router mode).

SSIDSECURITY TYPEKEYMAC FILTERING

SSID_Workers

WPA2-PSK

DoNotStealMyWirelessNetwork

Disable

 

WPA Compatible

 

 

 

 

 

 

SSID_VoIP

WPA-PSK

VoIPOnly12345678

Allow

 

 

 

00:A0:C5:01:23:45

 

 

 

 

SSID_Guest

WPA-PSK

keyexample123

Disable

 

 

 

 

1Connect your computer to the LAN port of the NBG-418N v2 using an Ethernet cable.

2The default IP address of the NBG-418N v2 in router mode is “192.168.1.1”. In this case, your computer must have an IP address in the range between “192.168.1.2” and “192.168.1.254”.

3Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to show your computer’s IP address. If your computer’s IP address is not in the correct range then see Appendix B on page 200 for information on changing your computer’s IP address.

4After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and type “http://192.168.1.1” as the web address in your web browser.

5Enter “1234” (default) as the password and click Login.

NBG-418N v2 User’s Guide

52