Chapter 4 Modes

Figure 26 Menu: AP Mode

The following table describes the sub-menus.

Table 13 Menu: AP Mode

LINK

TAB

FUNCTION

Network

 

 

 

 

 

Wireless LAN

General

Use this screen to configure wireless LAN.

 

 

 

 

MAC Filter

Use the MAC filter screen to configure the NBG-418N v2 to block access

 

 

to devices or block the devices from accessing the NBG-418N v2.

 

 

 

 

Advanced

This screen allows you to configure advanced wireless settings.

 

 

 

 

WPS

Use this screen to configure WPS.

 

 

 

 

WPS Station

Use this screen to add a wireless station using WPS.

 

 

 

 

Scheduling

Use this screen to schedule the times the Wireless LAN is enabled.

 

 

 

 

MBSSID

Use this screen to set the SSID for wireless AP.

 

 

 

LAN

IP

Use this screen to configure LAN IP address and subnet mask.

 

 

 

Maintenance

 

 

 

 

 

System

General

Use this screen to view and change administrative settings such as

 

 

system and domain names, password and inactivity timer.

 

 

 

 

Time Setting

Use this screen to change your NBG-418N v2’s time and date.

 

 

 

Logs

View Log

Use this screen to view the logs for the categories that you selected.

 

 

 

Tools

Firmware

Use this screen to upload firmware to your NBG-418N v2.

 

 

 

 

Configuration

Use this screen to backup and restore the configuration or reset the

 

 

factory defaults to your NBG-418N v2.

 

 

 

 

Restart

This screen allows you to reboot the NBG-418N v2 without turning the

 

 

power off.

 

 

 

Sys OP Mode

General

This screen allows you to select the device operation mode: Router,

 

 

Access Point, or Universal Repeater.

 

 

 

Language

Language

This screen allows you to select the language you prefer.

 

 

 

4.4 Setting your NBG-418N v2 to Universal Repeater Mode

1 Connect your computer to the LAN port of the NBG-418N v2.

NBG-418N v2 User’s Guide

39