ZyXEL Communications P-2302 8.2.3 NAT Port Forwarding Edit Screen

Chapter 8 NAT

Each field is described in the following table.

Table 51 Network > NAT > Port Forwarding

LABEL	DESCRIPTION
Default Server
Setup
Default Server	Enter the IP address of the server to which the ZyXEL Device should forward
	packets for ports that are not specified in the Port Forwarding section below or in
	the Management > Remote MGMT screens. Enter 0.0.0.0 if you want the ZyXEL
	Device to discard these packets instead.
Port Forwarding
#	This field is a sequential value, and it is not associated with a specific rule. The
	sequence is important, however. The ZyXEL Device checks each rule in order,
	and it only follows the first one that applies.
Active	Select this to enable this rule. Clear this to disable this rule.
Name	This field displays the name of the rule. It does not have to be unique.
Start Port	This field displays the beginning of the range of port numbers forwarded by this
	rule.
End Port	This field displays the end of the range of port numbers forwarded by this rule. If it
	is the same as the Start Port, only one port number is forwarded.
Server IP Address	This field displays the IP address of the server to which packet for the selected
	port(s) are forwarded.
Modify	This column provides icons to edit and delete rules.
	To edit a rule, click the Edit icon next to the rule. The NAT Port Forwarding Edit
	screen appears.
	To delete a rule, click the Remove icon next to the rule. All the information in the
	rule returns to the default settings.
Apply	Click this to save your changes and to apply them to the ZyXEL Device.
Cancel	Click this to set every field in this screen to its last-saved value.

8.2.3 NAT Port Forwarding Edit Screen

Use this screen to activate, deactivate, and edit each port-forwarding rule in the ZyXEL Device. To access this screen, click an Edit icon in Network > NAT > Port Forwarding.

Figure 65 Network > NAT > Port Forwarding > Edit

	121
P-2302HWUDL-P1 Series User’s Guide