Chapter 9 SIP
Each field is described in the following table.
Table 58 VoIP > SIP > SIP Settings > Advanced
LABEL | DESCRIPTION |
SIP Account | This field displays the SIP account you see in this screen. |
|
|
SIP Server |
|
Settings |
|
|
|
URL Type | Select whether or not to include the SIP service domain name when the ZyXEL |
| Device sends the SIP number. |
| SIP - include the SIP service domain name |
| TEL - do not include the SIP service domain name |
|
|
Expiration | Enter the number of seconds your SIP account is registered with the SIP register |
Duration | server before it is deleted. The ZyXEL Device automatically tries to |
| your SIP account when |
| might have a different expiration.) |
|
|
Register | Enter the number of seconds the ZyXEL Device waits before it tries again to |
timer | register the SIP account, if the first try failed or if there is no response. |
|
|
Session Expires | Enter the number of seconds the conversation can last before the call is |
| automatically disconnected. Usually, when |
| ZyXEL Device or the other party updates this timer to prevent this from happening. |
|
|
Enter the minimum number of seconds the ZyXEL Device accepts for a session | |
| expiration time when it receives a request to start a SIP session. If the request has |
| a shorter time, the ZyXEL Device rejects it. |
|
|
RTP Port Range |
|
|
|
Start Port | Enter the listening port number(s) for RTP traffic, if your VoIP service provider |
End Port | gave you this information. Otherwise, keep the default values. |
| To enter one port number, enter the port number in the Start Port and End Port |
| fields. |
| To enter a range of ports, |
| • enter the port number at the beginning of the range in the Start Port field |
| • enter the port number at the end of the range in the End Port field. |
|
|
Voice | Select the type of voice coder/decoder (codec) that you want the ZyXEL Device to |
Compression | use. G.711 provides higher voice quality but requires more bandwidth (64 kbps). |
| • G.711A is typically used in Europe. |
| • G.711u is typically used in North America and Japan. |
| In contrast, G.729 only requires 8 kbps. |
| The ZyXEL Device must use the same codec as the peer. When two SIP devices |
| start a SIP session, they must agree on a codec. |
|
|
Primary | Select the ZyXEL Device’s first choice for voice coder/decoder. |
Compression |
|
Type |
|
|
|
Secondary | Select the ZyXEL Device’s second choice for voice coder/decoder. Select None if |
Compression | you only want the ZyXEL Device to accept the first choice. |
Type |
|
|
|
Third | This field is disabled if Secondary Compression Type is None. |
Compression | Select the ZyXEL Device’s third choice for voice coder/decoder. Select None if |
Type | you only want the ZyXEL Device to accept the first or second choice. |
|
|
| 137 |
|
|