Chapter 3 Wizard Setup
The following table describes the labels in this screen.
Table 6 Connection Wizard > System Information
LABEL | DESCRIPTION |
System Name | Enter your computer's "Computer Name". See Section 22.1 on page 253 for more |
| information. This is for identification purposes, but some ISPs also check this field. |
| This name can be up to 30 alphanumeric characters long. Spaces are not allowed, |
| but dashes |
|
|
Domain Name | Enter the domain name entry that is propagated to DHCP clients on the LAN. If |
| you leave this blank, the domain name obtained from the ISP is used. Use up to |
| 38 alphanumeric characters. Spaces are not allowed, but dashes |
| "." are accepted. |
|
|
< Back | Click this to go to the previous screen. |
|
|
Next > | Click this to go to the next screen. |
|
|
Exit | Click this to close this screen and return to the main screen. |
|
|
This screen depends on the Connection Type you select.
3.2.3.1Ethernet
"You cannot use the Connection Wizard if you subscribe to a Roadrunner service. You must use the screens discussed in Chapter 6 on page 95 instead.
Figure 14 Connection Wizard > ISP Parameters (Ethernet)
The following table describes the labels in this screen.
Table 7 Connection Wizard > ISP Parameters (Ethernet)
LABEL | DESCRIPTION |
Connection Type | Select Ethernet. |
|
|
< Back | Click this to go to the previous screen. |
|
|
50 |
| |
| ||
|
|
|