Chapter 10 Phone
Table 64 DECT Phone Calls Summary
TYPE OF CALL | DESCRIPTION | LIMITS |
3 Way | A call between two DECT phones | One call. |
Conference | registered with the ZyXEL Device |
|
| base station and an external |
|
| connection. |
|
|
|
|
The ZyXEL Device allows up to four DECT phones to be active at one time.
The ZyXEL Device does not control how your DECT phone distinguishes between internal and external calls. Typically, a DECT phone has a button labeled int to indicate an internal call. Consult your DECT phone documentation for differences in making internal and external calls.
10.3.2.1 DECT Phones - Internal Calls
To make internal calls, you need to know the phone numbers of the other DECT phones registered with the ZyXEL Device. The ZyXEL Device assigns numbers based on the order that the DECT phones registered with the ZyXEL Device’s DECT base station. The first DECT phone that registered with the ZyXEL Device’s DECT base station receives the number 1, the second the number 2, and so on up to the last registered DECT phone.
Refer to your DECT phone documentation for specific details regarding your phone’s calling functions.
10.3.2.2 DECT Phones - External Calls
To make external calls, follow the same procedure as with the analog phone connected to the ZyXEL Device. You must also:
•Specify the SIP accounts for incoming and outgoing VoIP calls.
•Specify whether the DECT phones should receive calls on the PSTN line. (P-
When you assign a specific SIP account to be used with the DECT phone for outgoing or incoming calls, all of the DECT phones registered with the ZyXEL Device use this SIP account for making or receiving calls.
10.3.2.3 DECT Phones - Supplementary Services
There are two ways to perform supplementary phone services like call waiting, conference calling and so on.
•Via the handset - refer to your DECT phone documentation.
•Via the flash key function - refer to Section 10.1.3 on page 141. On most DECT phone models the flash key is the “R” key.
10.3.3DECT Phone ScreenUse this screen to configure your DECT base station settings. To access this screen, click VoIP > Phone > DECT Phone.
150 |
| |
| ||
|
|
|