Chapter 16 Static Route
"The first static route is the default route and cannot be modified or deleted.
Figure 112 Management > Static Route > IP Static Route
Each field is described in the following table.
Table 82 Management > Static Route > IP Static Route
LABEL | DESCRIPTION |
# | This field is a sequential value, and it is not associated with a specific rule. The |
| sequence is important, however. The ZyXEL Device checks each rule in order, |
| and it only follows the first one that applies. |
|
|
Name | This field displays the name that describes the static route. |
|
|
Active | This field shows whether this static route is active (Yes) or not (No). |
|
|
Destination | This field displays the destination IP address(es) that this static route affects. |
|
|
Gateway | This field displays the IP address of the gateway to which the ZyXEL Device |
| should send packets for the specified Destination. The gateway is a router or a |
| switch on the same network segment as the device's LAN or WAN port. The |
| gateway helps forward packets to their destinations. |
|
|
Modify | Use this field to edit or erase the static route. |
| Click the Edit icon to open the IP Static Route Edit screen for this static route. |
| Click the Remove icon to erase this static route. |
|
|
Use this screen to edit a static route in the ZyXEL Device. To access this screen, click an Edit icon in Management > Static Route > IP Static Route.
194 |
| |
| ||
|
|
|