Chapter 22 System
Figure 177 Maintenance > System > General
Each field is described in the following table.
Table 105 Maintenance > System > General
LABEL | DESCRIPTION |
System Setup |
|
|
|
System Name | Enter your computer's "Computer Name". This is for identification purposes, but |
| some ISPs also check this field. This name can be up to 30 alphanumeric |
| characters long. Spaces are not allowed, but dashes |
| accepted. |
|
|
Domain Name | Enter the domain name entry that is propagated to DHCP clients on the LAN. If |
| you leave this blank, the domain name obtained from the ISP is used. Use up to |
| 38 alphanumeric characters. Spaces are not allowed, but dashes |
| "." are accepted. |
|
|
Administrator | Enter the number of minutes a management session can be left idle before the |
Inactivity Timer | session times out. After it times out, you have to log in again. A value of "0" means |
| a management session never times out, no matter how long it has been left idle. |
| This is not recommended. Long idle timeouts may have security risks. The default |
| is five minutes. |
|
|
Password Setup |
|
|
|
Old Password | Enter the current password you use to access the ZyXEL Device. |
|
|
New Password | Enter the new password for the ZyXEL Device. You can use up to 30 characters. |
| As you type the password, the screen displays an asterisk (*) for each character |
| you type. |
|
|
Retype to Confirm | Type the new password again. |
|
|
Apply | Click this to save your changes and to apply them to the ZyXEL Device. |
|
|
Cancel | Click this to set every field in this screen to its |
|
|
22.2 Dynamic DNS Overview
Use this screen to set up the ZyXEL Device as a dynamic DNS client.
254 |
| |
| ||
|
|
|