22
System
Use this screen to set up general system settings, change the system mode, change the password, configure the DDNS server settings, and set the current date and time.
22.1 System Overview
22.1.1 System Name
System Name is for identification purposes. However, because some ISPs check this name you should enter your computer's "Computer Name".
•In Windows 95/98 click Start, Settings, Control Panel, Network. Click the Identification tab, note the entry for the Computer Name field and enter it as the System Name.
•In Windows 2000, click Start, Settings and Control Panel and then
•In Windows XP, click Start, My Computer, View system information and then click the Computer Name tab. Note the entry in the Full computer name field and enter it as the ZyXEL Device System Name.
22.1.2Domain Name
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host name (System Name) on each individual computer, the domain name can be assigned from the ZyXEL Device via DHCP.
22.1.3 General System Screen
Use this screen to change the ZyXEL Device’s mode, set up the ZyXEL Device’s system name, domain name, idle timeout, and administrator password. To access this screen, click Maintenance > System > General.
| 253 |
|
|