Chapter 10 Phone
10.1.3.2.2European Call Waiting
This allows you to place a call on hold while you answer another incoming call on the same telephone (directory) number.
If there is a second call to a telephone number, you will hear a call waiting tone. Take one of the following actions.
•Reject the second call.
Press the flash key and then press “0”.
•Disconnect the first call and answer the second call.
Either press the flash key and press “1”, or just hang up the phone and then answer the phone after it rings.
•Put the first call on hold and answer the second call. Press the flash key and then “2”.
10.1.3.2.3European Call Transfer
Do the following to transfer an incoming call (that you have answered) to another phone.
1Press the flash key to put the caller on hold.
2When you hear the dial tone, dial “*98#” followed by the number to which you want to transfer the call. to operate the Intercom.
3After you hear the ring signal or the second party answers it, hang up the phone.
10.1.3.2.4European
Use the following steps to make
1When you are on the phone talking to someone, place the flash key to put the caller on hold and get a dial tone.
2Dial a phone number directly to make another call.
3When the second call is answered, press the flash key and press “3” to create a
4Hang up the phone to drop the connection.
5If you want to separate the activated
10.1.3.3 USA Type Supplementary Services
This section describes how to use supplementary phone services with the USA Type Call Service Mode. Commands for supplementary services are listed in the table below.
After pressing the flash key, if you do not issue the
Table 61 USA Type Flash Key Commands
COMMAND | DESCRIPTION | |
Flash |
| Put a current call on hold to place a second call. After the second |
|
| call is successful, press the flash key again to have a |
|
| conference call. |
|
| Put a current call on hold to answer an incoming call. |
|
|
|
Flash | *98# | Transfer the call to another phone. |
|
|
|
| 143 |
|
|