Chapter 11 Quality of Service (QoS)
The following table describes the labels in this screen.
Table 37 QoS General
LABEL | DESCRIPTION |
Active QoS | Select the check box to turn on QoS to improve your network |
| performance. |
|
|
Select Default | This field is available only when you select Enable QoS. |
DSCP Mark | If you enable QoS and incoming traffic does not match a class |
| |
| configured in the Class Setup screen, the ZyXEL Device sets the DSCP |
| field in the packets with the value you select here. If you select No |
| Change, the ZyXEL Device keeps the DSCP fields in the packets. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
11.4 The Queue Setup Screen
Click QoS > Queue Setup to open the screen as shown next.
Use this screen to configure QoS queue assignment.
Figure 64 QoS Queue Setup
The following table describes the labels in this screen.
Table 38 QoS Queue Setup
LABEL | DESCRIPTION |
Add | Click this button to create a new entry. |
|
|
Queue Key | This is the index number of this entry. |
|
|
Active | Select the check box to enable the queue. |
|
|
Name | This shows the descriptive name of this entry. |
|
|
Interface | This shows the name of the ZyXEL Device’s interface through which traffic |
| in this queue passes. |
|
|
Precedence | This shows the priority queue of this entry. |
|
|
| 131 |
|
|