
Chapter 13 Remote Management
Click Advanced > Remote MGMT to open the following screen. Use this screen to configure your 
Figure 69 
The following table describes the fields in this screen.
Table 44 
| LABEL | DESCRIPTION | |
| Inform | Select Enable to activate remote management via  | |
| 
 | WAN. Otherwise, select Disable. | |
| 
 | 
 | |
| Inform Interval | Enter the time interval (in seconds) at which the ZyXEL Device sends | |
| 
 | information to the  | |
| 
 | 
 | |
| ACS URL | Enter the URL or IP address of the  | |
| 
 | 
 | |
| ACS User Name | Enter the  | |
| 
 | configuration server. | |
| 
 | 
 | |
| ACS Password | Enter the  | |
| 
 | configuration server. | |
| 
 | 
 | |
| WAN Interface | Select a WAN interface through which the  | |
| used by  | 
 | |
| client | 
 | |
| 
 | 
 | |
| Connection | Select this option to enable authentication when there is a connection | |
| Request | request from the ACS. | |
| Authentication | 
 | |
| 
 | 
 | |
| Connection | Enter the connection request user name. | |
| Request User | When the ACS makes a connection request to the ZyXEL Device, this | |
| Name | ||
| user name is used to authenticate the ACS. | ||
| 
 | ||
| 
 | 
 | 
| 144 | 
 | |
| 
 | ||
| 
 | 
 | 
 |