Chapter 7 Wireless LAN
address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses of the devices to configure this screen.
Use this screen to change your ZyXEL Device’s MAC filter settings.Click Network
>Wireless LAN > MAC Filter. The following screen displays.
Figure 46 Wireless LAN > MAC Filter
The following table describes the labels in this screen.
Table 24 Wireless LAN > MAC Filter
LABEL | DESCRIPTION |
Active MAC | Select the check box to enable MAC address filtering. |
Filter |
|
|
|
MAC Restrict | Define the filter action for the list of MAC addresses in the table below. |
Mode | Select Allow to permit access to the ZyXEL Device, MAC addresses not |
| |
| listed will be denied access to the ZyXEL Device. |
| Select Deny to block access to the ZyXEL Device, MAC addresses not listed |
| will be allowed to access the ZyXEL Device |
|
|
MAC | Enter the MAC addresses of the wireless devices that are allowed or denied |
Address | access to the ZyXEL Device in these address fields. Enter the MAC |
| addresses in a valid MAC address format, that is, six hexadecimal character |
| pairs, for example, 12:34:56:78:9a:bc. |
|
|
Add Entries | Click this to save and insert the entry to the table below. |
|
|
Set | This is the index number of the MAC address. |
|
|
MAC | This is the MAC addresses of the wireless devices that are allowed or denied |
Address | access to the ZyXEL Device. |
|
|
Remove | Select the entry(ies) that you want to delete in the Remove column, then |
| click the Remove button. |
|
|
Apply | Click this to save your changes back to the ZyXEL Device. |
|
|
Remove | Click this to delete the selected entry(ies). |
|
|
92 |
| |
| ||
|
|
|