Chapter 7 Wireless LAN
7.4.4 WPA(2) Authentication
Use this screen to configure and enable WPA or WPA2 authentication; click the Wireless LAN link under Network to display the General screen. Select WPA or WPA2 from the Security Mode list.
Figure 43 Wireless LAN > General: WPA(2)
The following table describes the wireless LAN security labels in this screen.
Table 21 Wireless LAN > General: WPA(2)
LABEL | DESCRIPTION | |
Security Mode | Choose WPA or WPA2 from the | |
|
| |
Active | This field is only available for WPA2. Select this if you want the ZyXEL | |
Compatible | Device to support WPA and WPA2 simultaneously. | |
|
| |
WPA Encryption | Select the encryption type (TKIP or AES) for data encryption. | |
|
| |
WPA2 | This field is available only when you select WPA2. | |
Preauthenticatio | ||
n | ||
(already connecting to an AP) to perform IEEE 802.1x authentication | ||
| ||
| with another AP before connecting to it. Select Enabled to turn on | |
| preauthentication in WAP2. Otherwise, select Disabled. | |
|
|
88 |
| |
| ||
|
|
|