Chapter 16 Logs
To change your ZyXEL Device’s log settings, click Maintenance > Logs > Log Settings. The screen appears as shown.
Figure 91 Maintenance > Logs > Log Settings
The following table describes the fields in this screen.
Table 52 Maintenance > Logs > Log Settings
LABEL | DESCRIPTION |
Active | Select to enable or disable system logging. |
|
|
Syslog Server | Enter the server name or the IP address of the log server. The logs will be |
IP Address | stored in both the ZyXEL Device and the log server. |
| Otherwise, enter 0.0.0.0 to store the logs in the local memory of the |
| ZyXEL Device only. |
|
|
Log Severity | Select the severity level of the logs that you want the ZyXEL Device to |
| record and send to the log server. |
| The ZyXEL Device records the logs with the severity level equal to or |
| higher than what you selected. |
| The order of the log severity (from the highest to the lowest) is |
| Emergency > Alert > Critical > Error > Warning > Notice > Informational |
| > Debugging. |
|
|
Apply | Click Apply to save your customized settings. |
|
|
Cancel | Click Cancel to return to the previously saved settings. |
|
|
| 171 |
|
|