
Chapter 7 Wireless LAN
7.6 The WPS Station Screen
Use this screen to set up a WPS wireless network using either Push Button Configuration (PBC) or PIN Configuration.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 45 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
Table 23 Network > Wireless LAN > WPS Station
LABEL | DESCRIPTION |
Push Button | Click this button to add another |
| wireless range of the ZyXEL Device) to your wireless network. This |
| button may either be a physical button on the outside of device, or a |
| menu button similar to the Push Button on this screen. |
| Note: You must press the other wireless device’s WPS button within |
| two minutes of pressing this button. |
|
|
Or input | Enter the PIN of the device that you are setting up a WPS connection |
station's PIN | with and click Start to authenticate and add the wireless device to your |
number | wireless network. |
| You can find the PIN either on the outside of the device, or by checking |
| the device’s settings. |
| Note: You must also activate WPS on that device within two minutes |
| to have it present its PIN to the ZyXEL Device. |
7.7 The MAC Filter Screen
This screen allows you to configure the ZyXEL Device to give exclusive access to specific devices (Allow) or exclude specific devices from accessing the ZyXEL Device (Deny). Every Ethernet device has a unique MAC (Media Access Control)
| 91 |
|
|