Chapter 16 Logs
The log wraps around and deletes the old entries after it fills.
Figure 90 Maintenance > Logs > View Log
The following table describes the fields in this screen.
Table 51 Maintenance > Logs > View Log
LABEL | DESCRIPTION |
Display | Select a category of logs to view. The ZyXEL Device displays the logs with |
| the severity level equal to or higher than what you selected. |
| The order of the log severity (from the highest to the lowest) is |
| Emergency > Alert > Critical > Error > Warning > Notice > Informational |
| > Debugging. |
|
|
Refresh | Click this button to renew the log screen. |
|
|
# | This field is a sequential value and is not associated with a specific entry. |
|
|
Date/Time | This field displays the time the log was recorded. |
|
|
Facility | This field displays the system module from which the logs come. |
|
|
Severity | This field displays the severity type of the log. |
|
|
Message | This field states the reason for the log. |
|
|
16.3 The Log Settings Screen
Use the Log Settings screen to configure to where the ZyXEL Device is to send logs and which logs and/or immediate alerts the ZyXEL Device is to record and display.
170 |
| |
| ||
|
|
|