Chapter 17 Tools
If the upload was not successful, the following screen will appear. Click Tools > Configuration to go back to the Configuration screen.
Figure 99 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all
Figure 100 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your ZyXEL Device. Refer to Section 1.6 on page 22 for more information on the RESET button.
17.4 The Restart Screen
System restart allows you to reboot the ZyXEL Device without turning the power off.
178 |
| |
| ||
|
|
|