Chapter 5 WAN Setup
5.4.1 Advanced Internet Connection Setup
Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the Advanced Setup button in the Internet Connection screen. The screen appears as shown.
Figure 28 WAN > Internet Connection: Advanced Setup
The following table describes the labels in this screen.
Table 10 WAN > Internet Connection: Advanced Setup
LABEL | DESCRIPTION |
RIP & Multicast | This section is not available when you configure the ZyXEL Device to be |
Setup | in bridge mode. |
|
|
RIP Version | RIP (Routing Information Protocol) allows a router to exchange routing |
| information with other routers. |
| This field is available only when you select ENET ENCAP. |
| This shows the RIP version used for this WAN connection. |
|
|
RIP | This field is available only when you select ENET ENCAP. |
Operation | This shows whether RIP is enabled (Active) or not (Disable) on this |
| |
| WAN connection. |
|
|
IGMP | Multicast packets are sent to a group of computers on the LAN and are |
Multicast | an alternative to unicast packets (packets sent to one computer) and |
| broadcast packets (packets sent to every computer). |
| IGMP (Internet Group Multicast Protocol) is a |
| used to establish membership in a multicast group. The ZyXEL Device |
| supports both IGMP version 1 and version 2. Select Enable to turn on |
| IGMP. Otherwise, select Disable. |
|
|
56 |
| |
| ||
|
|
|