|
| Chapter 5 WAN Setup |
| Table 12 WAN > More Connections: Edit (continued) | |
| LABEL | DESCRIPTION |
| Symmetric | Select this option to enable symmetric NAT on this connection. |
|
| This field is available only when you select Active NAT. |
|
|
|
| Fullcone | Select this option to enable full cone NAT on this connection. |
|
| This field is available only when you select Active NAT. |
|
|
|
| VLAN | This section is available in this screen only when you select Bridge in |
|
| the Mode field. |
|
|
|
| VLAN Active | Select this option to enable VLAN multiplexing of multiple protocols |
|
| over a single virtual circuit. You need to assign a VLAN ID and priority |
|
| level to traffic through each WAN connection. All WAN connections |
|
| share one MAC address. This allows the backbone switch to classify |
|
| and service traffic based on the VLAN tag, instead of the MAC address. |
|
| Otherwise, disable VLAN multiplexing and each WAN connection has |
|
| its own MAC address. |
|
| Note: This field is only configurable for the first WAN connection. |
|
| When you change the setting here, all existing WAN |
|
| connections will be removed except for the first WAN |
|
| connection. |
|
|
|
| VLAN ID | Enter a VLAN ID number for traffic that goes through this connection. |
|
|
|
| Priority | Enter a priority level for traffic that goes through this connection. |
|
|
|
| Back | Click this to return to the More Connections screen with saving your |
|
| changes. |
|
|
|
| Apply | Click this to save the changes. |
|
|
|
| Reset | Click this to begin configuring this screen afresh. |
|
|
|
| Advanced Setup | Click this button to display the More Connections Advanced Setup |
|
| screen and edit more details of your WAN setup. |
|
| This button is not available when you select Bridge in the Mode field. |
|
|
|
| 61 |
|
|