VSG-1200 User’s Guide

 

Table 68 SMT: System Configuration (continued)

 

 

 

 

FIELD

DESCRIPTION

 

 

 

 

Web Server Port

Specify the port number of the embedded web server on the VSG to access the

 

 

web configurator. The default port number is 80.

 

 

Enter a number between 8010 and 8060 to access the web configurator behind a

 

 

NAT-enabled network.

 

 

If you enter a number between 8010 and 8060, you need to append the port

 

 

number to the WAN or LAN port IP address to access the web configurator. For

 

 

example, if you enter “8010” as the web server port number, then you must enter

 

 

“http://www.192.168.1.1:8010” where 192.168.1.1 is the WAN or LAN port IP

 

 

address.

 

E-mail Server

Enter the IP address or domain name of the e-mail server to which the VSG

 

Redirect

forwards e-mail. This field should be configured if the e-mail server is behind a

 

 

firewall or on a NAT-enabled network.

At the “S)ave and return R)eturn without saving M)odify:” prompt, type S and press [ENTER] to save the changes and return to the previous screen, type R and press [ENTER] to discard all changes and return to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart the device when prompted

Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All changes will be discarded.

26.6 Changing the System Password

Note: It is recommended you change the default system password.

Follow the steps below to change the system password.

1In the main menu, type 5 and press [ENTER] to display the Utilities menu.

2In the Utilities menu, type 2 and press [ENTER]. The Change Administrator Password menu displays.

Figure 140 SMT: Change Administrator Password

Change Administrator Password

Enter the old password :

Enter the new password :

Confirm the new password:

3Type your current system password in the Enter the old password field, and press

[ENTER].

Chapter 26 The SMT

203